Menu
Your Cart

I/O Subsystems

12V 2 Channel Optoisolated Relay ModuleWorking Voltage: 12VRelay Contact Ampacity: 10ATrigger Level: Active Low..
₱75.00 ₱90.00
Delay ON/OFF MOSFET Module with Optoisolated Trigger inputImportant: MOSFET output operates on DC load only. MOSFET driver provides much longer service life (over electromechanical relays) when the timer has to switch cycle frequently.Supply Voltage: 6-30VDCTime Delay: 0.1s to 1 hour in 8 rangesLoad..
₱184.00
e-Gizmo 1 to 5 Channels Relay Module 12V Optoisolated Input e-Gizmo 1 to 5 Channels Relay Module 12V Optoisolated Input
Ship in 1-3 days
Brand: e-Gizmo
Important: The price indicated is per channel of the board (e.g. If you need 3 channels, order 3 pcs).e-Gizmo 1 to 5 Channels 12V Relay board uses a miniaturized relay to keep the overall product small. Small in size but big in performance. It uses a high-quality TV-3 rated relay, with UL safety app..
₱45.00
4 Channel 12V Relay module with 10A contact- Opto isolated input- LED Indicators- NO/NC Terminals- 220VAC Rated ContactsNote: Please note this is the 12V version!..
₱150.00
4-CH Automotive Relay 12V 4-CH Automotive Relay 12V
Ship in 1-3 days
Brand: e-Gizmo
-Genuine 2x Matsushita Automotive Qualified Dual relay for a full 4 channel relay function- Automotive relays can take a lot of punishment during operation (e.g. Vibration, shock, high temperature, etc.) and keep going. The mentioned conditions can kill low quality relays in a short time.- 12V Coil..
₱150.00
Delay ON/OFF Relay Module with Optoisolated Trigger inputSupply Voltage: 6-30VDCTime Delay: 0.1s to 1 hour in 8 rangesLoad Capacity: 10A @ 250VAC or 30VDCStandby current: 6mA TypDownloads :Manual Guide Downloads..
₱187.00
5V Relay module with 10A contact- Buffered input (Active High)- LED Indicators- NO/NC TerminalsPower Supply: 5VRelay Contact Ampacity: 10AContact Configuration: SPDTCompatible with 3.3V to 5V logic drive (eg. gizDuino, Arduino, Raspberry Pi)..
₱54.00
4 Channel 5V Relay module with 10A contact- Opto isolated input- LED Indicators- NO/NC Terminals- 220VAC Rated ContactsCompatible with 3.3V to 5V logic drive (eg. gizDuino, Arduino, Raspberry Pi)..
₱150.00
Thumb Joystick 2 Axis Thumb Joystick 2 Axis
Pre-order
Analog output 2-axis Thumb JoystickWith push switch output- 5 pins terminal configuration: +5V GND VRX VRY SWSpecifications :Power Input 5VDCOutput Analog : X-Axis : 0 - 1023 Y-Axis : 0 - 1023Button : 1 || 0Downloads :Hardware Manual DownloadSampl..
₱48.00
8 Channel relay board- Optocoupler isolated drivers- 5V coil voltage- 10A at 220VAC/32VDC  SPDT Contact- LED Indicators for each channelCompatible with logic driving 5V and 3V (e.g. Arduino, Raspberry Pi)..
₱199.00
2-Ch Relay Module 2-Ch Relay Module
-17 % Pre-order
5V 2 Channel Optoisolated Relay ModuleWorking Voltage: 5VRelay Contact Ampacity: 10ATrigger Level: Active LowCompatible with 3.3V to 5V logic drive (eg. gizDuino, Arduino, Raspberry Pi)..
₱75.00 ₱90.00
5V Relay module with 10A contact- Buffered input (Active Low)- LED Indicators- NO/NC Terminals- 220VAC Rated Contacts..
₱45.00
Showing 1 to 12 of 29 (3 Pages)