Search

Chemi-con MVK Series General Purpose Aluminum Electrolytic CapacitorManufacturer Part No: EMVK350ADA470MHA0GCapacitance:47uF +/-20%Working Voltage: 35VDCCategory Temperature Range: -40C to +105CDissipation Factor: 0.14 @120HzRipple Current: n/aImpedance: n/aDimensions: d8 x 10mmMarkings may vary fro..

CapXon (Taiwan) KF Series Low Impedance CapacitorCapacitance: 2200uF +/-20%Working Voltage: 25VDCMax. Impedance @100KHz: 0.035RDissipation Factor: 12%max at 120HzLoad Life: 2000-5000 Hours at 105CRipple Current: 2650mA @ 105CDimensions: d12 x h40 mmLead Spacing: 5mm..

Panasonic 3V Lithium Battery with solder tabs for heavy-duty backup functions.Note: This is NOT a rechargeable batteryNominal Voltage:3VCapacity: 620mAhContinuous Standard Load: 0.2mADimensions: d24.5 x 5.0mmWeight: 6.2g approx.Operating Temperature: -30 to +85CTab Terminal: H Type..

True rated Li-ion Battery with built-in BMS protection board.MPN: F26402274Nominal Voltage: 3.6VCapacity: 2200mAh 8.1WhDimensions: 18650 sizeCells: Sanyo/Panasonic UR18650AATermination: 3-wire Molex 3.96mm pitch.Actual Measured Capacity (random sampling) @ 1.0A constant current discharge2.08, 2.12..

True rated Lipo Battery with built-in BMS protection board.UL Approved.Nominal Voltage: 7.4VCapacity: 1800mAh 13.32WhCharging Voltage Limit: 8.4VYear Manufactured: 2014-2015Dimensions:56.5Wx60Lx13T mm approx.Actual Measured Capacity - 1650mAH to 1750mAHInstrument Used: Itech IT8512C Electronic LoadC..

3.7V 3500mAh Li-ion Rechargeable BatterySize: 18650Note: This type of battery has no built-in protection circuit (BMS), hence should be used with caution. Overcharging and over discharging should be avoided to prevent damaging the product. This can be easily done with garden variety 1S BMS module...

Marking: 7B8733The TPS7B8733-Q1 is a low-dropout linear regulatordesigned to connect to the battery in automotiveapplications. The device has an input voltage rangeextending to 40 V, which allows the device towithstand transients (such as load dumps) that areanticipated in automotive systems. With o..

Marking:79633QFeatures- Qualified for Automotive Applications - 1-A Low-Dropout Regulator With Enable- Very Low NoiseVoltage Input: 2.7 to 5.5VVoltage Output: 3.3VDropout Voltage: 365mVOutput Current: 1A max. Package/Image: SOT223-6..

Marking: 4275D33The TLE 4275 V33 is a monolithic integrated low dropout fixed output voltage regulator for loads up to 400mA. An integrated reset generator with adjustable power-on delay time as well as several protection circuits predestine the IC for supplying microprocessor systems in an automoti..

Marking: 4251Features• Output tracking tolerance = ±0.2%• 400 mA output current capability• Enable function• Very low current consumption in OFF mode• Wide operation range: up to 40 V• Wide temperature range: -40 °C = Tj = 150 °C• Output protected against short-circuit• Overtemperature protectionVol..

Marking: 33KA5The BDxxKA5 series are low-saturation regulators that are available for output currents up to 500mA. This series can be used for a broad spectrum of applications ranging from TVs and car audio systems to HDDs, PCs, and DVDs. These regulators have a built-in overcurrent protection circu..

Reputable BrandUL Approved.Nominal Voltage: 7.4VNominal Capacity: 2000mAMaximum Discharge: 2000mA ContinouslyInternal Impedance:..