Search

Digital Voltmeter Display 0.28inch 3 digits 0-100VDC 3-Wires

Digital Voltmeter Display This is a 3-wire digital voltage that can work in 2-wire mode (4 - 30VDC max) or 3-wire mode that enables it to extend the display range to 0-100VDC.Display Voltage Range: 0 to 100VDCPower Supply Input Voltage: 4-40V DCDisplay: 0.28" 3-Digit 7-segment RED LEDRefresh Rate: 2..

₱39.00

8x8 3mm Dot Matrix Display Red GC7219 MAX7219

Single 8x8 d3mm Dot Matrix ModuleSocketed Display for easy replacement.Expandable: Can be daisy chained to build many character display unit.GC7219 Driver Chip (Equivalent to MAX7219)4-wire Serial InterfaceOperating Voltage: 4.7V- 5.3VLED Color: Bright redKit contains:1x Display Module2x Pin Connect..

₱78.00

Bargain RGB LED Board

This LED board was used for back illumination. Has user selectable RGB and White LEDs.Operating Voltage: 12VDCNumber of LEDS: - 9 SMD RGB LED - 9 White SMD LEDEach control inputs requires about 100mA current and are active low. Very limited stocks only...

₱13.00

SSD1306 OLED Module

0.96-inch 128x64 pixels SSD1306 OLED Display Module. Wide operating voltage makes it logic compatible with a wide range of Microcontroller boards, including (not limited to) 5V gizDuino and Arduino boards, and 3.3V STM32 and Raspberry Pi boards.OLED - generate its own light by pixels, no backlight ..

₱139.00

Pre-order

LCD I2C 2004 GREEN

20x4 Character LCD Module with I2C BoardGray Character on Green Screen BackgroundSupply Voltage: 5VInterface: I2C I2C Address: 0x3F,0x40Downloads :Hardware Manual DownloadWiring Diagram with gizDuino PLUS DownloadSample Arduino / gizDuino Sketches DownloadLiquidCrys..

₱236.00

Pre-order

LCD I2C 2004 BLUE

20x4 Character LCD Module with I2C BoardWhite Character on Blue Screen BackgroundSupply Voltage: 5VInterface: I2C I2C Address: 0x3F,0x40Downloads :Hardware Manual DownloadWiring Diagram with gizDuino PLUS DownloadSample Arduino / gizDuino Sketches DownloadLiquidCrys..

₱236.00

Pre-order

LCD I2C 1602 BLUE

16x2 Character LCD Module with I2C BoardWhite Character on Blue Screen BackgroundSupply Voltage: 5VInterface: I2C I2C Address: 0x3F,0x40Downloads :Hardware Manual DownloadWiring Diagram with gizDuino PLUS DownloadSample Arduino / gizDuino Sketches DownloadLiquidCrys..

₱145.00

MAX7219 8-Digit 7 segment Display Module

7-segment 8-digit Display ModuleController: MAX7219Supply Voltage: 3.3-5.0VLED Display: 10mm RedInterface: 3-wire SerialCompatible with 3.3V to 5V logic drive (eg. gizDuino, Arduino, Raspberry Pi)Downloads :Sample Codes DownloadsLEDControl Library Downloads..

₱92.00

MAX7219 Dot Matrix 4 pane

8x8dots x 4 Dot Matrix Display d3mmMAX7219 DriverCan be daisy chained or used independent from each modulesSupply Voltage: 5VDCSupplied with Dupont Jumper wiresDownloads :Sample Codes DownloadsMAX71xxPanel libraries Downloads..

₱279.00

MAX7219 Dot Matrix

Single 8x8 d3.75mm Dot Matrix ModuleMAX7219 Driver Chip4-wire Serial InterfaceOperating Voltage: 4.7V- 5.3VLED Color: Bright redDownloads:LedControl library DownloadSample code Download..

₱120.00

2x16 LCD with I2C Interface Board

Pre-order

2x16 Alphanumeric LCD Displays are dirt cheap these days. Hence, they become very popular among electronics DIYers. There is one potential problem though when using one with your microcontroller (gizDuino/Arduino) projects- they require quite a number of I/O's - seven to be exact. Once you have inst..

₱145.00

Serial LED Matrix Display Controller

Brand: e-Gizmo

The Serial LED Matrix Controller, when installed with a set of e-Gizmo's LED Dot Matrix Panels (see Notes), allows you to build a message display unit in a jiffy. This controller takes care of all the controller coding details to make yours a lot simpler. To display a message, you (your controller) ..

₱645.00