Hobby_Motors
Brand: Think
Industrial Hi Torque DC Motor with gear boxOperating Voltage: 24VDC Nominal, 6VDC-24VDCNo load RPM: 70RPM @ 24VDC , 12RPM @ 6VDCRPM at rated load: 52RPMRunning Torque: 294 mN-m (3kgf-cm) @ rated loadCurrent: 200mA (loaded), 60mA (No load) Power: 1.6WDiameter: 37mmLenght: 47mm (up to shaft base)Shaft..
₱350.00
-68 %
Brand: Himax
Himax Outrunner Brushless Motor (Multiplex)High power high speed brushless DC Motor3-phase 12-pole 48AMax Output: 450WMax RPM: 10,000Weight: 235gDia: 63mmThickness: 32mmFor RC aircraft applications and robotics project..
₱999.00 ₱3,100.00
Thrust Motor for underwater ROV3-blades propeller CW ThrustOperating Voltage Range: 3-12V (Recommended 6V-9V)Hull Lenght: 50mmDiameter: 31mmTotal Lenght: 76mmPropeller: 39mmRPM: 16800 RPM @ 7.4VDC no load..
₱665.00
Pre-order
Thrust Motor for underwater ROV3-blades propeller CCW ThrustOperating Voltage Range: 3-12V (Recommended 6V-9V)Hull Lenght: 50mmDiameter: 31mmTotal Lenght: 76mmPropeller: 39mmRPM: 16800 RPM @ 7.4VDC no load..
₱665.00
Pre-order
3VDC Gear MicromotorGA12-N20Speed: 300RPMWorking Voltage: 1.5V-6VDCOutput Drive Shaft: d4.4 x 10mm..
₱220.00
Pre-order
3VDC Gear MicromotorGA12-N20Speed: 150RPMWorking Voltage: 1.5V-6VDCOutput Drive Shaft: d4.4 x 10mm..
₱220.00
-47 %
Gear Motor 12VDC 110RPMTorque: 10kg-cmPower: 2.09Wd4 x10mm Drive Shaft with brass insertPlastic BlacketFPC Wire connectionNote: This is a used surplus item tested in good working condition. Expect posiible minor scratches, dents, and surface discoloration...
₱395.00 ₱750.00
Brand: Minebea
Mini Stepping Motor with 12-teeth GearBipolar, 19 ohms/windingTerminal Connection: A - pins 1 & 3 B- pins 4 & 6100 steps per revolution (3.6 deg per step)Size: 25x25x21mm..
₱157.00
12V Unipolar Stepping Motor15 degrees/step50 ohms CoilFitted with 11 teeth Brass GearWire Lenght: 350mm with 2mm pitch 5-pin wafer terminationMotor Dimensions: Dia=25 Thickness=15.5 Shaft Lenght = 29 mm..
₱99.50
DC Motor 3-6V with 12-tooth Brass GearWired with L=130mm shielded cable with 2mm pitch wafer terminationWith noise reducing capacitors already installed...
₱45.00
-39 %
Pre-order
Brass Motor Coupling m3.5x7d3.5mm threaded x d7.0mmL=18mmWith pair of locking nut and Hex driver..
₱86.00 ₱141.00
Pre-order
Micromotor & Wheel Set with CoverVoltage: 3-12VDCExposed metal gear assembly..
₱459.50