Menu
Your Cart

e-Gizmo

Brand: e-Gizmo
Designed for Mobile Robot line tracking applications, five or three infrared reflective sensors CNY70 will reliably detect dark lines printed over light color surface. Detection distance >10mm from sensor face is possible. Adjustable sensitivity for each sensors. Demo Video : Specifications :Po..
₱350.00
Brand: e-Gizmo
e-Gizmo Heart Rate monitor module is a non-invasive heart rate detection device. Just put a finger over the sensor, and it will output pulses at a rate your heart beats.Specifications :Power Input 5VDCOutput Type Digital PulsesDownloads :Hardware Manual Download..
₱175.00
PRESSURE: Gauge Pressure Sensor
Ship in 1-3 days
Brand: e-Gizmo
Our new Gauge Pressure sensor breakout board featuring Small size and Low Power Consumption with 0 to 37 kPa Pressure range. Application examples for leak detection, pressure controller, level indicatorNote : Must be interface with e-Gizmo Sensor Amplifier. Specifications :Power InputMust be in..
₱320.00
4 Direction / Tilt Sensor
Ship in 1-3 days
Brand: e-Gizmo
Direction/Tilt sensor breakout board based on Rohm RPI-1031 sensor. Detects x-y tilt or motion in 4 quadrant direction. Two- bit Logic outputs latches and indicates the most recent motion direction. Specifications :Power Input3.3 ~ 5VDCOutput TypeDigital : 0,1 - 0,0 - 1,0 - 1,1 SensorRohm RPI-1..
₱195.00
Brand: e-Gizmo
MQ-5 Gas Sensor Kit is sensitive to H2, LPG, CH4, CO, Alcohol. With HIGH, MEDIUM, and LOW Digital Output with LED Indicator per output and had on-board potentiometer for easy calibration and analog output for actual gas sensing value.    Specifications :Power Input 5 ~ 7VDCA..
₱280.00
Brand: e-Gizmo
MQ2 Gas Sensor is sensitive to combustible gas and smoke, and can also be used to detect H2, LPG, CH4, CO, Alcohol.With HIGH, MEDIUM, and LOW Digital Output with LED Indicator per output and had on-board potentiometer for easy calibration and analog output for actual gas sensing value.   ..
₱95.00 ₱250.00
Brand: e-Gizmo
MQ-7 is a Carbon Monoxide detecting sensor. With HIGH, MEDIUM, and LOW Digital Output with LED Indicator per output and had on-board potentiometer for easy calibration and analog output for actual gas sensing value.    Specifications :Power Input 5 ~ 7VDCAvailable On-Board G..
₱335.00
Brand: e-Gizmo
Detects objects passing in between the sensor transmitter and receiver modules. Sensor modules can be separated up to more than a meter. Use it to detect objects in conveyor line system, pass through security, etc..Specifications :Power Input5VDC (7.5-12VDC if 7805 Voltage Regulator is installed.)De..
₱350.00
Brand: e-Gizmo
smoke sensor detects the presence of smoke by measuring the drop in current in the ionization detector (HIS-07). The ionization detector uses Americium as a source of ionizing radiation for ionizing oxygen and nitrogen in the air that normally generates a small continuous electric current but when s..
₱575.00
Brand: e-Gizmo
Sensor Amplifier, also known as an Instrumentation amplifier, is a special type of  amplifier built to meet the precision and stability necessary to get the best readout accuracy and repeatability. It has built-in bias source that can be used for bridge configured sensors, such as load cells an..
₱450.00
Brand: e-Gizmo
Detects objects as far as 72mm (2.8 inches) from the sensor face. Infrared beam makes it relatively insensitive to ambient light and color (of target object). Applications includes non contact object detection and collision sensor for mobile robots.Demo Video :Specifications :Power Input5VDCDete..
₱75.00 ₱198.00
Brand: e-Gizmo
e-Gizmo Sound Activator Switch were you can control your devices by using a snap of you finger or clap to make a noise or sound. Its very useful requires only +5VDC for the supply input and an output pin connection for high or low logic control. Compatible in all gizDuino boards. Specifications :Pow..
₱138.00
Showing 337 to 348 of 389 (33 Pages)