e-Gizmo

The EGRF-433A1 transmitter and receiver pair is a low-cost solution for radio wireless control application circuits. Operating at 433MHz ISM frequencies, this low power radio system has a remote operating reach of more than 100 meters in open field (125 meters/370 ft being typical) . The control dis..

The EGRF-433A1 transmitter and receiver pair is a low-cost solution for radio wireless control application circuits. Operating at 433MHz ISM frequencies, this low power radio system has a remote operating reach of more than 100 meters in open field (125 meters/370 ft being typical) . The control dis..

UHF-EX is a transparent wireless UART transceiver with 100mW RF output. This RF power allows a useful control range of more than 500m (unobstructed line of sight LOS range can reach 700m).Specifications :Power Input5V/3.3V jumper selectable Frequency Range431.1 MHz – 437.3 MHz Channel Sepa..

gizDuino compatible card shield for SD/MMC card read and write applications. Two card sockets allows user applications to work on two SD/MMC at a time. Uncommited I/O pin gives user the freedom to assign I/O to his/her liking. Specifications :Power InputPowered via gizDuino (Arduino Clone) SD-C..

Our new low cost Organic LED (OLED) Shield is a 2"" diagonal, 128x160 pixels Graphic Display. The shield is usually paired with an SD Card shield for image display. It includes brightness, contrast, and color adjustments. One can make a DIY cellular phone using this shield and many more applications..

ENC28J60 based ethernet interface module in gizDuino (Arduino Compatible) pin layout. It can be used just as easily with other MCU host controllers. Allows your gizDuino or MCU circuit to connect to your intranet and internet network. gizDuino users can easily build internet enabled projects and app..

Opto-isolated input and relay dry contact outputs for industrial strenght applications. Compatible with e-Gizmo Arduino and Pinguino clones. Using an Atmega8 based controller, you can even program the system with ladder style programming using LDMicro Ladder Logic software- a free PLC style ladder l..

This LED Matrix Drivers used in conjunction with our gizDuino (Arduino compatible) controller and LED dot matrix display kit to build a full function LED dot matrix display system. Specifications :Power InputPowered via gizDuino/Arduino boardMax LED Matrix Board Driving CapacityUp to 5 Cascaded Boar..

Our SIMCOM SIM900D GSM/GPRS kit is repackaged to allow it to function as a gizDuino (Arduino Compatible) Shield as well. New features includes buffered 5V tolerant UART port for worry free interfacing between 3V to 5V host MCUs.Specifications :Power Input5VDC 1.5AData CommunicationSerial UARTCommand..

e-Gizmo Global Positioning System GPS shield has buffered UART serial I/O that allows it to be interfaced with any host MCU operating within 3V to 5V range. Full I/O interface functions are available through a 2x7 header connector. Ready to use as a gizDuino (Arduino Compatible) Shield . UART/SUART1..