Solenoid Actuator TDS-10A

Solenoid actuator with plunger, push-in, pull-out
Note: No spring

Nominal Voltage: 12V (caution: Red wire (+) Blue wire (-). See note below)
Yoke Material: Chromated steel
Wire coonection terminated with 2.54mm wafer connector

Body Dimensions: 24 x 29 x 40mm
Plunger Diameter: 10mm
Overall lenght including plunger:53mm
Weight:129g

Important Note:
This solenoid valve is equipped with spike suppressor. DO NOT REVERSE wire polarity. Permanent damage will occur.