Kinsten Presensitized PCB ( Single Sided 4x3 )

Description
Reviews

Kinsten single side presensitized PCB 16PS75100.
For DIY PCB Pattern photo transfer method of fabrication.
Positive Acting
Developer Included
Size: 75x100mm
1.6mm Thick
Base Material: Paper Phenolic PP for single side
Typical Exposure time using Fluorescent Lamp: 6-10 minutes

Important note/disclaimer:
Some PCBs may be supplied by the manufacturer without a film backing (gray/black film shown in the photo). Please contact us first before ordering if this will be an issue. We can do a visual inspection before shipping out this product at your request.

Reminder:
Keep the PCB inside the original envelop until it is ready to be used.
Work under subdued lighting rooms during handling and preparation of PCB.
Make sure the developer is fully dissolved before dipping the PCB.

Packing:
1x 4x3 Presensitized PCB
1x 25g Developer (dissolve with 300mL water per 25g pack)

Prices and stock availability subject to change without prior notice. If you want this product but it indicates it is not in stock, chat us or simply add it to your cart anyway. Our staff will contact you to inform if we can/cannot provide the item in your order.

You Might Like
From the Same Brand

Solderless Breadboard ( Small )

This half size breadboard with 270 connection points, good for small projects...

₱68.00

Solderless Breadboard ( Long )

This full size breadboard with 700 connection points, good for small or big projects...

₱108.00

Prototyping PCB ( EGPC-03) Connected Pads

Single Side Paper Phenolic Prototyping PCBNon plated pads with anti corrosion coating for good solderability2.54mm hole pitchPrototyping area 30x48 pe..

₱30.00

Prototyping PCB ( EGPC-03) Uncommited Pads

Single Side Paper Phenolic Prototyping PCBNon plated pads with anti corrosion coating for good solderability2.54mm hole pitchPrototyping area 30x48 pe..

₱30.00

Prototyping PCB ( EGPC-02) Connected Pads

For Restocking

Single Side Paper Phenolic Prototyping PCB Non plated pads with anti corrosion coating for good solderability 2.54mm hole pitch Prototyping area 30..

₱20.00

Prototyping PCB ( EGPC-02) Uncommited Pads

Single Side Paper Phenolic Prototyping PCB Non plated pads with anti corrosion coating for good solderability 2.54mm hole pitch Prototyping area 30..

₱20.00

Kinsten Presensitized PCB ( Double Sided 6x10 )

Kinsten double-sided presensitized PCB GD1525.For DIY PCB Pattern photo transfer method of fabrication.Positive ActingDeveloper IncludedSize: 150x250m..

₱545.00

Kinsten Presensitized PCB ( Double Sided 6x8 )

Kinsten double-sided presensitized PCB GD1520.For DIY PCB Pattern photo transfer method of fabrication.Positive ActingDeveloper IncludedSize:150x200mm..

₱444.00

People Also Bought

DCJ-02

DC Jack Female 5.5mm Case Mountable Package/Image: 554221140..

₱6.50

5V to 3.3V DC-DC stepdown power supply AMS1117

AMS1117 is a 5V to 3.3V stepdown linear converter module than can output up to 800mA to a connected load. Specifications:Input Voltage : 4.6V ~ 10VDC ..

₱18.00

ULN2003A

DARLINGTON TRANSISTOR ARRAYS Package/Image: SOIC-16..

₱20.00

HB611-2 Screw Terminal Block

Hot

PC Solderable 2 pins Screw TerminalThe interlocking case allows you to add more terminals seamlesslyVoltage Rating: 300VCurrent: 20APoles: 2Pin Pitch:..

₱6.50

HB611-3 Screw Terminal Block

PC Solderable 3 pins Screw TerminalThe interlocking case allows you to add more terminals seamlesslyVoltage Rating: 300VCurrent: 20APoles: 3Pin Pitch:..

₱9.00

ATMEGA328P DIP with Arduino Bootloader

Pre-order

ATMEGA328P 8-bit Pico Power microcontroller pre programmed with Arduino bootloader.- 32KB Flash Memory- 1024 Bytes EEPROM- 2KB SRAM- 23 GPIO- Up to 20..

₱139.00