12-24V 6000rpm High Torque DC Motor Double Shaft Magnetic Shield

Tags: motor , stepper motor , dc motor , gear motor

Description
Reviews

Good Quality High Torque DC Motor usable down to 5VDC. Double-end drive shaft with 14 teeth metal gear. Gear can be removed if not needed.

With a Magnetic shield to minimize stray magnetic fields from interfering with nearby sensitive parts.

Nominal Voltage: 12VDC
Operating Voltage: 12V-24VDC
No load Current: 77mA @ 24VDC
Stall Current: 1.2A @ 12V, 2.2A @ 24V
No Load RPM: 1320 rpm@6V, 2880rom@12V,6000rpm@24V

Approximate Dimensions:
Body Diameter: 30.5
Body Lenght: 47mm body + 2.6x2 mm protruding cups
Shaft Lenght: 8mm front + 11mm rear
Shaft Diameter: 3.1 mm

Weight: 142g

Note: Wire colors may vary.

Prices and stock availability subject to change without prior notice. If you want this product but it indicates it is not in stock, chat us or simply add it to your cart anyway. Our staff will contact you to inform if we can/cannot provide the item in your order.

You Might Like
From the Same Brand

Servomotor SG90 ( 160degrees )

Hot

Good quality low cost equivalent to TowerPro SG90 ServomotorVoltage 4.8-6V (5V typical)Torque : 2.5 kg-cmSpeed : 0.1 secWeight : 14.7 gramsDimensions:..

₱89.00

Servo SG-5010 ( 160 degrees )

Genuine TowerPro SG5010 Operation Voltage: 4.8V - 6V DCAverage Speed: 0.2sec/60degree (@ 4.8V), 0.16sec/60degree (@ 6V)Torque: At 5V, 5.5kg-cm, and at..

₱435.00

Digital Servomotor MG995 ( 160 degrees )

Genuine Tower Pro MG995 ServomotorOperation Voltage: 4.8V-6V Torque:4.8V: 130.54 oz-in (9.40 kg-cm) 6.0V: 152.76 oz-in (11.0..

₱720.00

Digital Servomotor SG-5010 ( 360 degrees )

For Restocking

Genuine TowerPro SG5010 Operation Voltage: 4.8V - 6V DCAverage Speed: 0.2sec/60degree (@ 4.8V), 0.16sec/60degree (@ 6V)Torque: At 5V, 5.5kg-cm, and at..

₱455.00

Digital Servomotor MG995 ( 360 degrees )

Genuine Tower Pro MG995 ServomotorOperation Voltage: 4.8V-6V Torque:4.8V: 130.54 oz-in (9.40 kg-cm) 6.0V: 152.76 oz-in (11.0..

₱720.00

DC Geared Motor 6VDC 80RPM

DC Geared Motor 6VDC 80RPM..

₱385.00

12-24V 12000rpm High Torque DC Motor RS385-ST

Pre-order

Good Quality RS385 Type DC Motor usable down to 5VDC.With 17 teeth herringbone Plastic Gear - this can be easily removed if not needed.Nominal Voltage..

₱75.00

Related Products
People Also Bought

12-24V 12000rpm High Torque DC Motor RS385-ST

Pre-order

Good Quality RS385 Type DC Motor usable down to 5VDC.With 17 teeth herringbone Plastic Gear - this can be easily removed if not needed.Nominal Voltage..

₱75.00

LM358

Low Power Dual Op Amp Package/Image: SOIC-8..

₱12.00

L293D

Quad Half-H Driver CA Package/Image: DIP-16..

₱121.00

Hot

LDR10MM

Light Dependent Resistor 10mm..

₱15.00

AWG22 SOLID CORE Jumper Wire W-G per Meter

Hot

High quality Insulated Copper wire- Suitable for breadboard wiring- AWG 22 0.65mm- Precut at 1M lenghtsAvailable Colors:Red, Black, White, Green..

₱7.00

Pre-order

Test Probe Pair Branded

Test Probe Pair Red/Black..

₱129.00

Stainless Shaft 301 d10 x 360mm Machined Ends ( Shafting Rod Round Bar )

Brand new stainless steel shaft with machined ends.Priced for DIYers and makers.(You can cut off the machined ends if it does not fit your purpose.)St..

₱99.00