Search
Search Criteria
Search
New
Brand: e-Gizmo
Speed/Power controller for brush type DC Motor.Working Voltage: 6V-90VDCPower Output: 0.01-1000WMaximum Output Current: 15AStandy Current: 5mA TypicalPWM Duty Cycle: 0-100%PWM Frequency: 15kHz
Useful link:
6-90V 15A PWM DC Motor Speed controller Review and Testing with different motors
Yo..
₱240.00
![5-Phase Microstepping Stepper Motor Driver [USED]](https://www.e-gizmo.net/oc/image/cache/package/i_CONTROL/STEPPER/610200002-200x200.jpg "5-Phase Microstepping Stepper Motor Driver [USED]")
![5-Phase Microstepping Stepper Motor Driver [USED]](https://www.e-gizmo.net/oc/image/cache/package/i_CONTROL/STEPPER/610200002/610200002-5-200x200.jpg "5-Phase Microstepping Stepper Motor Driver [USED]")
New
Brand: Technodrive
This stepper motor driver is for 5-phase type motor only.16 predetermined microsteps. Combining these steps makes it possible to microstep up to 125,000 pulses per revolution.Technodrive Made in Japan Input Power: 24-36VDCDrive Current: 0.5 to 1.4A per phase, switch selectablePulse Frequency: 500Kpp..
₱789.00
This 3-phase Brushless DC Motors controller, although primarily designed for e-bikes, works just as well with many other DC brushless motors used for DIY projects.Operating Voltage: 36/48VDC Auto-selectOperating Current: 15A Max.Output Capacity: 350W maximumSpeed Control Input Voltage: 0-5VDCHall Se..
₱556.00
Motor Controller for 100W-500W 3-phase Brushless DC Motors. Operating Voltage: 12-36VDC (Note 1)Operating Current: 15A Max.Output Capacity: 500W (Note 2)Speed Control Input Voltage: 0-5VDCHall Sensor Input: 0-5V LogicNote 1: Although the manufacturer rates this for up to 36VDC, It is recommended to..
₱475.00
Pulse Width Modulation DC Motor Speed Controller.For DC Brush Motor OnlyOperating Voltage Range: 4.5VDC - 35VDCStandby Current: 7uA TypicalOutput Current: 5A MaximumRated Output: 90W maximumPWM Frequency: 20KHzDuty Cycle: 1-100%Package: 1x PWM Module1x Knob1set Potentiometer NutWeight: 15gDimensions..
₱75.00
2-Channel L9110S Motor Driver- Independent control of two DC motors - Alternatively, it can also be used to drive single bipolar (4-wire) stepper motorPower Supply Voltage: 2.5-12VDCMaximum Drive current: 800mA per outputTTL/CMOS compatible drive inputs..
₱85.00
2 Channel PWM Motor DriverFor driving and PWM control of up to two DC brush motor or 1 bipolar stepper motorOpeartion Voltage: 2V-10VDCCurrent: 1.5A Cont, 2.5A peak..
₱39.50
-4 %
L293 based Motor Driver-Drives 4 DC Motor or two Stepper Motor-Built-in 2 Channel Servo Motor Interface Port- 0.6A (1.2A peak) load capacity - Motor Voltage: 4.5V to 36VDC- 8-bit speed control function for DC motors
Downloads :
Adafruit Motor Shield Library
Downloads..
₱134.00 ₱140.00
Brand: e-Gizmo
8A DC Motor DriverOperating Voltage : 6V to 24VDCDevice : VNH5050A Peak Drive: 30 Amps (internally limited)Drive Ampacity: 8 Amps w/ heatsink 4 Amps no HeatsinkOverload Ampacity: 8 Amps for 25 secs (no heatsink) 10 Amps for 45 secs (with heatsink)Fault Indicators: Output Short Circuit Thermal Shu..
₱430.00
2A Unipolar uStepper Motor DriverLoad Voltage Supply: 10V-42VLogic Volatge Supply: 4/75-5.25V1/16 microstepping..
₱200.00