While it is fairly easy to DIY a 10/100BT POE injector, thanks to the 4 unused wires which can be readily used for the conversion, the same cannot be said when it comes to the gigabit port, since all 8 wires are in use to carry the data. Power delivery must be shared with a pair of data-carrying wir..
Single-channel Capacitive Touch Module with 4 modes of jumper selectable operation.Jumper pads are marked as "A" and "B".Mode of operations:A-open, B-open = Active high Touch-ON A-open, B-shorted = Active High Touch-ON Touch-OFFA-shorted, B-open = Active Low Touch-ON A-shorted, B-shorted = Active Lo..
This is one mystery module for advanced and adventurous experimenters. Other than being a timer module, we do not know anything more than that. We do not know how to operate or wire it. That is why we are selling it at a bargain.Each part is labeled with Chinese characters. It has a Flash microcont..
Hand soldering Micro USB connector can be a daunting task, if it is even possible at all. That's why you will need this Micro USB Breakout board if you will be building a project that has a Micro USB port...
DS3231 Real Time Clock Module with BatterySmall form factorPower: 2.3-5.5VDual calendar alarm, +/-3? accuracy of digital temperature sensorHigh-speed(400kHz) I2C serial bus1Hz and 32.768kHz output reset button debounced input and output.
DS3231 Arduino Library
DS3231 Real Time Clock Module withAT24C32 EEPROMPower: 3.3-5.5VDual calendar alarm, +/-3? accuracy of digital temperature sensorHigh-speed(400kHz) I2C serial bus1Hz and 32.768kHz output reset button debounced input and output.Note: Battery not included and is sold separately