Your Cart

Special Offers

Isolated I/O Shield
-53 %
Brand: e-Gizmo
Opto-isolated input and relay dry contact outputs for industrial strenght applications. Compatible with e-Gizmo Arduino and Pinguino clones. Using an Atmega8 based controller, you can even program the system with ladder style programming using LDMicro Ladder Logic software- a free PLC style ladder l..
₱750.00 ₱1,590.00
JM162B 2X16 LCD & I/F Adapter Kit JM162B 2X16 LCD & I/F Adapter Kit
-56 %
Brand: e-gizmo
16 Characters x 2 lines LCD display unit with 4-bit interface board.The interface board pre-wires the LCD unit to 4-bit parallel interface - a wiring method widely used because of reduced I/O pins requirement. Contrast control is also on-board, so are other components needed to easily breadboard or ..
₱99.00 ₱224.00
Jumper Wire FFx40-10
-45 %
40 pins/pcs Ribbon Jumper Wire10cm Female to Female..
₱49.50 ₱90.00
Jumper Wire MFx40-10
-45 %
40 pins/pcs Ribbon Jumper Wire10cm Male/Female..
₱49.50 ₱90.00
Jumper Wire MMx40-10
-45 %
40 pins/pcs Ribbon Jumper Wire10cm Male/Male..
₱49.50 ₱90.00
L293 Motor Driver Shield L293 Motor Driver Shield
-12 %
L293 based Motor Driver-Drives 4 DC Motor or two Stepper Motor-Built-in 2 Channel Servo Motor Interface Port- 0.6A (1.2A peak) load capacity - Motor Voltage: 4.5V to 36VDC- 8-bit speed control function for DC motors Downloads : Adafruit Motor Shield Library Downloads..
₱123.00 ₱140.00
LAH 50-P Hall Effect Current Sensor
-33 %
Brand: LEM
AC/DC Hall Effect Closed Loop Current SensorHigh Accuracy, low temperature driftNominal Current: 50ArmsMeasuring Range: 0-+/-100ASecondary Nominal Current: 25mAAccuracy: +/- 0.25%Linearity: <0/15%Bandwidth: DC-200KHzProduct ManualDownload"..
₱855.00 ₱1,280.00
LCD Module 2x16 Blue
-23 %
LCD Module 2 lines x 16 char BLUEWith Backlight16 pins Standard..
₱89.00 ₱115.00
LCD with I2C I/F 2x16 LCD with I2C I/F 2x16
-0 % By Order
2x16 LCD Module with I2C BoardLimited Stock.Visit the e-Gizmo TechBlog! for more info. Click here!..
₱99.00 ₱99.00
LED Matrix Common Cathode Driver Shield
-53 %
Brand: e-Gizmo
Used in conjunction with our gizDuino (Arduino compatible) controller and LED dot matrix display kit to build a full function LED dot matrix display system. Specifications :Power InputPowered via gizDuino (Arduino Clone) Max LED Matrix Board Driving CapacityUpto 5 Cascaded Boards ( 4ft )Specifi..
₱350.00 ₱750.00
Lightning Cable 1.0M
-40 %
USB Lightning Cable 1.0MPrice shown is for one cableChoice of 6 colors..
₱60.00 ₱100.00
LJC18A3 PNP Capacitive Sensor
-23 % By Order
Capacitive Proximity Sensor PNP OutputDetects metal and non metallic objectsExample: Plastic, water, glass, oil, powder, etcPower: 6V-36VDCDetection Distance: 1-10mmOutput Switch Type: PNPImportant: This device output voltages harmful to the gizDuino/Arduino boards. A level translator interface circ..
₱290.00 ₱378.00
Showing 61 to 72 of 134 (12 Pages)