All Products

OEM true rated AC Adapter UL Listed.Why does independent safety certification matter? Products approved by UL and other safety agencies took stringent tests to make sure they are safe to use under typical usage conditions. Specifically, they ensure that reasonable safeguards are in place to protect ..

JST VH Connector 3 poles 2 wires. Center pole N.C.Housing: VHR-3N (N type)Voltage Rating: 250V AC DCPitch: 3.96mmWire Size: AWG 18 VW-1 600VWire Length: 330mm Red White..

JST VH Connector 3 poles 2 wires. Center pole N.C.Housing: VHR-3N (N type)Voltage Rating: 250V AC DCPitch: 3.96mmWire Size: AWG 18 VW-1 600VWire Length: 110mm Red White..

Wire: AWG18 VW-1 600VWire Length: 50mm approx.Wire Color: BrownTermination: 4.8mm and 6.3mm Female Spade Crimp ConnectorSpade Connector Material: Copper with tin plating..

Wire: AWG18 VW-1 600VWire Length: 50mm approx.Wire Color: BlueTermination: 4.8mm and 6.3mm Female Spade Crimp ConnectorSpade Connector Material: Copper with tin plating..

Wire: AWG18 VW-1 600VWire Length: 185mm approx.Wire Color: Green with yellow stripeTermination: 6.3mm Female Spade Crimp Connector and d3x6 Ring TerminationConnector Material: Copper with tin plating..

Wire: AWG18 VW-1 600VWire Length: 130mm approx.Wire Color: WhiteTermination: 4.8mm Female Spade Crimp Connector (one end only)Spade Connector Material: Copper with tin plating..

Wire: AWG18 VW-1 600VWire Length: 130mm approx.Wire Color: BlackTermination: 4.8mm Female Spade Crimp Connector (one end only)Spade Connector Material: Copper with tin plating..

USB A to Barrel Plug 5V Power cableBarrel Plug (DC Plug) size: 5.5mm O.D. x 2.1mm I.D.Polarity: Outside NegativeTotal Lenght: 450mm (0.45M)..

USB to TTL Converter based on the popular CP2102 USB Bridge chip.Power source: USB port (5VDC)Output Voltage: 3.3V TTL output levelAvailable i/o:- RX Receive input- TX Transmit output- DTR Data Terminal Ready outputNote: DTR output makes this suitable as an Arduino USB programming module...

The JDY-40 is a complete wireless transceiver module operating in the 2.4GHz band. It can be configured to function as a transparent mode wireless UART, or as a remote I/O, turning ON or OFF a selected I/O under user control.Power supply range: 2.2V to 3.6VFrequency: 2.4GHzChannels: 128Tx Power: +12..

- Low Offset Voltage: 10µV (MAX)- Open-Loop Voltage Gain: 150dB (TYP)- PSRR: 150dB (TYP)- CMRR: 140dB (TYP)- Input Voltage Noise Density: 10nV/vHz at 1kHz- Gain-Bandwidth Product: 8MHz- Slew Rate: 6V/us- Overload Recovery Time: 0.7µs- Rail-to-Rail Output Swing- Output Short Circuit Current: 70mA Typ..