*Kits & Modules
AS608 Optical Fingerprint Sensor Adafruit Library compatibleNote: This module will work only with 3.3V Supply and Logic Levels. It is level compatible with Rapberry Pi and most ARM based controllers. If you want to use this with 5V host controllers, level converter must be used on the TX and RX pin...
₱555.00
Arduino Compatible NANO is a surface mount breadboard embedded version with type C USB connector. It is a smallest arduino board.MCU: ATMEGA328POperating voltage: 5VDCDigital I/O pins: 14 (6 PWM output)PWM Digital I/O pins: 6 (D3,D5,D6,D9,D10,D11)Analog Input pins: 6 (A0-A5)Flash Memory: 32KB..
₱199.00
Brand: Simcom
With the imminent sunsetting of 2G networks, 2G modules, such as SIM800L, may no longer work in the Philippines.A7670E 4G module can be a cost effective replacement for the aging 2G modules.- 4G Cat-1 means it will work with common LTE SIM Card (Tested with Globe and Smart SIM).- Support SMS functio..
₱950.00
Brand: e-Gizmo
With the imminent sunsetting of 2G networks, 2G modules, such as SIM800L, may no longer work in the Philippines.Air780E 4G module can be a cost effective replacement for the aging 2G modules.- 4G Cat-1 means it will work with common LTE SIM Card (Tested with Globe and Smart SIM).- Support SMS functi..
₱750.00
The E32-900T20D is a wireless transceiver module operating in the 862-931MHz band. Its powerful 20dbm (100mW) transmitter and use of LORA Spread Spectrum Technology enable a line-of-sight LOS transmission up to more than 5km, while meeting the emission standards guidelines set by the FCC.Power Suppl..
₱675.00
Pre-order
Brand: Raspberry Pi
Raspberry Pi 5 8GB RAMNote: Price shown is VAT exclusive. +12% VAT price is PHP 7125.00*RP1*Raspberry Pi 5 is built using the RP1 I/O controller, a package containing silicon designed in-house at Raspberry Pi.USB 3 has more total bandwidth, for much faster transfer speeds.Camera and DSI display conn..
₱6,362.00
Pre-order
Brand: Arduino
Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you`re a beginner stepping into the world of IoT or MicroPython, or an advanced user looking to incorporate it into your next product..
₱1,545.00
2 cell 2S Li-Ion and LiPo switch mode constant current battery charger module.Input Port Type: USB C and Solder PadsInput Voltage: 3-6V DC (3.7V-5V recommended)Input Current: 4ACharging Current: 2.2ACharging cut-off Voltage: 8.4VLED Status Indicators:CR - Charging ModeOK - Charging Complete..
₱58.00
Pre-order
2 cell 2S Li-Ion and LiPo switch mode constant current battery charger module.Input Port Type: USB C and Solder PadsInput Voltage: 3-6V DC (3.7V-5V recommended)Input Current: 2ACharging Current: 1.1ACharging cut-off Voltage: 8.4VLED Status Indicators:CR - Charging ModeOK - Charging Complete..
₱58.00
Digital Voltmeter Display This is a 3-wire digital voltage that can work in 2-wire mode (4 - 30VDC max) or 3-wire mode that enables it to extend the display range to 0-100VDC.Display Voltage Range: 0 to 100VDCPower Supply Input Voltage: 4-40V DCDisplay: 0.28" 3-Digit 7-segment RED LEDRefresh Rate: 2..
₱39.00
Pre-order
Brand: Arduino
Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you`re a beginner stepping into the world of IoT or MicroPython, or an advanced user looking to incorporate it into your next product..
₱1,595.00
This product is an adjustable boost converter combined with charging module.Battery: Li-ion 3.7V 1S (not included with this kit)Boost Converter Function:Output Voltage: 4.3 to 27V adjustableOutput Power: 7WCharging Function:Charging Cut-off Voltage: 4.2VCharging Current: 1A maxNotes: 1. Default outp..
₱46.00