This product is a fixed output dc/dc converter designed as a drop-in replacement for popular 3-terminal positive voltage regulator. It has the same pin arrangement as with the 78XX series, with an extra enable pin to allow your circuit to shut down the regulator to further lower the power consumptio..
TP4056-1A Li-Ion 1S Battery Charger Modulewith Type C USB connector port.With built-in BMS over current and undervoltage protectionUSB Port Type: Type CCharging cut-off Voltage: 4.2V +/- 1%Maximum Charging Current: 1ABattery Overcurrent Protection: 3ABattery Over Discharge Protection: 2.5V..
This product is a high-efficiency DC-DC Step Down Converter configured as a Dual Output Charger.Input Voltage Range: 6-26VDCOutput Voltage: 5.2VOutput Current: 2A Total Max. (3A if you mount a heatsink)Warning: This product will be permanently damaged if the power input is connected in the wrong pol..
This product is a high-efficiency DC-DC Step Down Converter. It can be used as a power supply or charger module.Input Voltage Range: 4-38VDCOutput Voltage Adjustment Range: 1.25-36VDCOutput Current: 5A Max.Output Power: 75W MaxEfficiency: Up to 96%Protection: Thermal Shutdown & Output short circuit...
3S 20A Li-ion Battery Charger BMS Protection with Recovery FeatureSuitable for 3x 18650 batteriesCharging Voltage cutoff: 3.7V-4.3V per cellDischarging Voltage cutoff: 2.3-3.0VCurrent: 20A maximum..
With this product, You can easily build a DIY power bank from a single 3.7V Lithium Ion battery. - Integrated charging and dsicharge management.- High temperature shutdown protection.- Output short circuit and over voltage protection.Input Voltage: 3.7V-5.5VDCInput Low Voltage Cutoff: 2.9VCharging C..
This product will work even with 1 cell niMH battery. Output current capacity varies with the input voltage, with higher voltage resulting with higher efficiency and available current output.Operating Input Voltage: 0.9V-5VmaxConversion Efficiency: up to 96%Output Port: USB FemaleCaution: Module may..
Installing your expensive electronics outdoors or one that requires wires coming from the outside must be protected from harm due to power surges caused by natures playfulness (e.g., thunderstorms, solar flares).This kit inserts surge protective devices - MOVs, Gas discharge tubes, common-mode induc..
Specifications; (Please see Notes)Input Voltage: 4.5-40VDC Adjustable Output Voltage Range: 1.25-37VDCOutput Current: 3A Max Digital Display: 3-digit 7 segment LEDOutput ON/OFF push button switch.Important Notes:For proper operation:1. Input voltage must always be greater than the input voltage by ..
Specifications; (Please see Notes)Input Voltage: 3.5-12VDC Adjustable Output Voltage Range: 1.25-24VDCOutput Power: 2-3WDigital Display: 3-digit 7 segment LEDPower input ports: USB or uUSB or Solder PadsOutput ON/OFF push button switch.Important Note:Efficiency and power output capacity drop with i..