All Products

 e-Gizmo 6A H-Bridge Motor Driver (or High Temperature H-Bridge Motor Driver) is a motor driver kit for brushed DC motors. It has elaborate protection features that makes it largely tolerant to a number of common faults, such as reverse power supply wiring, and momentary output short circuit. ..

User selectable 1 to 16 microstep function significantly reduce motor vibrations for quiet and more reliable stepper motor operation. Automatic reduction of current drive during hold state keeps your stepper motor running cool. Compatible with both unipolar and bipolar stepper motors.Specifications ..

3.3V/5V, TTL-compatible, and combination of electromechanical relay and fault tolerant MOSFET switch makes this a durable drive for DC motors. Fault tolerance is central to this device, hence all control inputs as opto-isolated, power and motor terminals are fitted with user serviceable fuse. PWM a..

Those who worked long enough with RC servo motors knows just how dangerous it can be when power to the servo is first applied with servo drive rotation far from their initial position. Those sudden movements can damage the mechanism, and worse, can cause injuries.This module minimizes that danger by..

Independent control of up to 16 RC servo motor in a single board. 1uS pulse width resolution. Serial TTL level UART I/O port interfaces easily with most microcontrollers, including gizDuino (Arduino Compatible Board). Easy to use command set. Additional Power Modules : (Optional) Servo Soft Sta..

This all-in-one mobile robot board consists of 3-channel line tracker sensor, 3 IR Proximity-Collision Sensor, and 2-channel DC motor driver and this board can be controlled by and Arduino Microcontroller Clones or boards. With open circuit design for prototyping and interfacing means.This boar..

Works with 8V - 35VDC input. Efficient switching operations allows full load operation without heatsink even with high input-output voltage differential. Made to order. 3.3V to 24VDC output and up to 80VDC input available. Specifications :Power Input 8 ~ 24VDC Power Output 3.3VDC..

Audio Amplifier Module built on LM3886 chip, a high performance, high fidelity amplifier very popular in the DIY Audio world.Note: Must be mounted on a heatsink. Heatsink is sold separately Sample ApplicationSpecifications :Power Input +/-29VDC Power Output @ 1% THD 68W sin..

Negative supply from a +5V source. Output adjustable from -5 to -15VDC, and is usable up to -20VDC but at a reduced power output and efficiency. 1.7W output @ -10VDC output. Three terminal negative voltage regulator pin layout.Specifications :Power Input5 ~ 10VDC Power OutputAdjustable,  -..

A high fidelity stereo amplifier built on car audio LA4708 chip. This BTL amplifier is capable of delivering up to 20W per channel when operated with 13.2 VDC source (i.e. fully charged automotive battery). Although primarily designed for car audio (or motorcycle audio, if such thing exists), it wil..