All Products

Detects objects passing in between the sensor transmitter and receiver modules. Sensor modules can be separated up to more than a meter. Use it to detect objects in conveyor line system, pass through security, etc..Specifications :Power Input5VDC (7.5-12VDC if 7805 Voltage Regulator is installed.)De..

smoke sensor detects the presence of smoke by measuring the drop in current in the ionization detector (HIS-07). The ionization detector uses Americium as a source of ionizing radiation for ionizing oxygen and nitrogen in the air that normally generates a small continuous electric current but when s..

Sensor Amplifier, also known as an Instrumentation amplifier, is a special type of  amplifier built to meet the precision and stability necessary to get the best readout accuracy and repeatability. It has built-in bias source that can be used for bridge configured sensors, such as load cells an..

Detects objects as far as 72mm (2.8 inches) from the sensor face. Infrared beam makes it relatively insensitive to ambient light and color (of target object). Applications includes non contact object detection and collision sensor for mobile robots.Demo Video :Specifications :Power Input5VDCDete..

e-Gizmo Sound Activator Switch were you can control your devices by using a snap of you finger or clap to make a noise or sound. Its very useful requires only +5VDC for the supply input and an output pin connection for high or low logic control. Compatible in all gizDuino boards. Specifications :Pow..

UART-WiFi is an embedded module based on the UART serial, in accordance with the WiFi wireless WLAN standards, IEEE802.11 protocol stack and TCP / IP protocol stack. It enables the data conversion between the user serial and the wireless network module through the UART - WiFi module. Traditional ser..

The EGRF-433A1 transmitter and receiver pair is a low-cost solution for radio wireless control application circuits. Operating at 433MHz ISM frequencies, this low power radio system has a remote operating reach of more than 100 meters in open field (125 meters/370 ft being typical) . The control dis..

The EGRF-433A1 transmitter and receiver pair is a low-cost solution for radio wireless control application circuits. Operating at 433MHz ISM frequencies, this low power radio system has a remote operating reach of more than 100 meters in open field (125 meters/370 ft being typical) . The control dis..

UHF-EX is a transparent wireless UART transceiver with 100mW RF output. This RF power allows a useful control range of more than 500m (unobstructed line of sight LOS range can reach 700m).Specifications :Power Input5V/3.3V jumper selectable Frequency Range431.1 MHz – 437.3 MHz Channel Sepa..

JZ863, the mini power wireless module, is used as the wireless data transmission in short distance. With the small size, weight and power consumption and good stability and reliability, it has the function of bidirectional data sign transmission, test and control. It is use..