Display and HMI Subsystems

Digital Voltmeter Display This is a 3-wire digital voltage that can work in 2-wire mode (4 - 30VDC max) or 3-wire mode that enables it to extend the display range to 0-100VDC.Display Voltage Range: 0 to 100VDCPower Supply Input Voltage: 4-40V DCDisplay: 0.28" 3-Digit 7-segment RED LEDRefresh Rate: 2..

Single 8x8 d3mm Dot Matrix ModuleSocketed Display for easy replacement.Expandable: Can be daisy chained to build many character display unit.GC7219 Driver Chip (Equivalent to MAX7219)4-wire Serial InterfaceOperating Voltage: 4.7V- 5.3VLED Color: Bright redKit contains:1x Display Module2x Pin Connect..

This LED board was used for back illumination. Has user selectable RGB and White LEDs.Operating Voltage: 12VDCNumber of LEDS: - 9 SMD RGB LED - 9 White SMD LEDEach control inputs requires about 100mA current and are active low. Very limited stocks only...

0.96-inch 128x64 pixels SSD1306 OLED Display Module. Wide operating voltage makes it logic compatible with a wide range of Microcontroller boards, including (not limited to) 5V gizDuino and Arduino boards, and 3.3V STM32 and Raspberry Pi boards.OLED - generate its own light by pixels, no backlight ..

16x2 Character LCD Module with I2C BoardWhite Character on Blue Screen BackgroundSupply Voltage: 5VInterface: I2C I2C Address: 0x3F,0x40Downloads :Hardware Manual DownloadWiring Diagram with gizDuino PLUS DownloadSample Arduino / gizDuino Sketches DownloadLiquidCrys..

7-segment 8-digit Display ModuleController: MAX7219Supply Voltage: 3.3-5.0VLED Display: 10mm RedInterface: 3-wire SerialCompatible with 3.3V to 5V logic drive (eg. gizDuino, Arduino, Raspberry Pi)Downloads :Sample Codes DownloadsLEDControl Library Downloads..

8x8dots x 4 Dot Matrix Display d3mmMAX7219 DriverCan be daisy chained or used independent from each modulesSupply Voltage: 5VDCSupplied with Dupont Jumper wiresDownloads :Sample Codes DownloadsMAX71xxPanel libraries Downloads..

Single 8x8 d3.75mm Dot Matrix ModuleMAX7219 Driver Chip4-wire Serial InterfaceOperating Voltage: 4.7V- 5.3VLED Color: Bright redDownloads:LedControl library DownloadSample code Download..

The Serial LED Matrix Controller, when installed with a set of e-Gizmo's LED Dot Matrix Panels (see Notes), allows you to build a message display unit in a jiffy. This controller takes care of all the controller coding details to make yours a lot simpler. To display a message, you (your controller) ..