Your Cart


Brand: e-gizmo
Serial Interface Adapter for 5-Inches Display Board Features :On board high efficiency DC/DC converter allows the display unit to work from 7.5-16V DC sourceUser determined display size, supports up to 4 e-Gizmo Dot Matrix panel display assembly.Simple serial UART display command ..
Brand: e-gizmo
16 Characters x 2 lines LCD display unit with 4-bit interface board.The interface board pre-wires the LCD unit to 4-bit parallel interface - a wiring method widely used because of reduced I/O pins requirement. Contrast control is also on-board, so are other components needed to easily breadboard or ..
₱99.00 ₱224.00
Brand: e-gizmo
Built for large stepper motors with huge appetite for power, this micro-stepper motor driver can provide 6 Amps* drive and will work with up to 32VDC power source. Current drive is user adjustable. Other features includes  user selectable full/half/quarter/sixteenth microstepping, opto-isolated..
SIM800L GSM/GPRS Modem Shield
-30 % Pre-order
Brand: e-gizmo
Quad-band GSM/GPRS Modem Module with user configurable UART Channel. It is a full feature GSM Shield with SMS/Call functions. Just plug in to your favorite gizDuino or Arduino Microcontrollers. Features :With power saving mode for low current consumption.Audio channel which include..
₱546.00 ₱781.50
Rotary Encoder Break-out Board Rotary Encoder Break-out Board
-41 % Pre-order
Brand: e-gizmo
Rotating controls are our most ergonomic way of adjusting something, and is the preferred method over push buttons, especially when it involves fast and repeated adjustments. (For example, a potentiometer for volume control.) But digital circuits are not exactly well suited for analog potentiometer ..
₱75.00 ₱127.00
Brand: e-gizmo
e-Gizmo TA8201AK Audio Power Amp Module is a high performance automotive audio power amplifier, but is also well suited for home audio applications. This is a single channel monophonic amplifier.Features : :High Power Amplifier 17W Monowith Built in protector circuit like Thermal shutdow..
₱165.00 ₱250.00
Brand: e-gizmo
Sensor shield provides a convenient way to connect sensors to your gizDuino/Arduino based projects. LED I/O state monitors are provided on all I/O ports for quick visual checking of port states, which can be valuable during debugging and troubleshooting. Servo Motor connection ports are also provide..
Brand: e-gizmo
PVG612 SSR Kit is a ""NORMALLY OPEN"" Solid-state Relay that can replace electromechanical relays in many applications. The compact PVG612 is particularly suited for iolated switching of high currents from 12 to 48 volts AC or DC power sources. The applications of this type of ssr are mainly devices..
Brand: e-gizmo
e-Gizmo Bio-Amp Sensor Circuit is an instrumentation amplifier designed to pick-up minute electrical voltage by living biological organ like the human body. Its main feature is the use of Signal Opto-Isolation and high CMRR instrumentation amplifier output.Downloads :Technical Reference Dow..
Beefy: H-Bridge Motor Driver Beefy: H-Bridge Motor Driver
-28 % For Restocking
Brand: e-gizmo
Nicknamed Beefy, this H-Bridge Motor Driver is the latest variants in our high current DC motor driver series. Ideal for use  in intermittent low duty high current applications, like mobile robots.Specifications :Motor Supply Voltage 7-35VDCLoad Current > 20A surge, 6A Continu..
₱550.00 ₱765.00
Brand: e-gizmo
The e-Gizmo temperature control unit display is a simple temperature control and readout unit. It uses an LM34 temperature sensor and display the temperature in degrees Centigrade units.Features :Interface with gizDuino MCU.Reading is calibrated directly to celciusLinear 10.0 mV/de..
₱550.00 ₱704.50
Showing 1 to 12 of 21 (2 Pages)