Search
Search Criteria
Search
Brand: Think
Industrial Hi Torque DC Motor with gear boxOperating Voltage: 24VDC Nominal, 6VDC-24VDCNo load RPM: 70RPM @ 24VDC , 12RPM @ 6VDCRPM at rated load: 52RPMRunning Torque: 294 mN-m (3kgf-cm) @ rated loadCurrent: 200mA (loaded), 60mA (No load) Power: 1.6WDiameter: 37mmLenght: 47mm (up to shaft base)Shaft..
₱350.00
This general purpose motor driver has two independent drivers that can be used to PWM speed control up to two DC brush motor, or as a driver for single bipolar stepper motor.Driver Chip: TC1508SOperation Voltage: 2V-10VDCCurrent: 1.5A Cont, 2.5A peakInput Logic Level: 5V Logic..
₱39.50
Brand: Himax
Himax Outrunner Brushless Motor (Multiplex)High power high speed brushless DC Motor3-phase 12-pole 48AMax Output: 450WMax RPM: 10,000Weight: 235gDia: 63mmThickness: 32mmFor RC aircraft applications and robotics project..
₱999.00 ₱3,100.00
Metal gear, ball bearing ServomotorWorking Torque: 2kg-cmSpeed: 0.11s per 60 degrees rotation @ 4.8VDCDead Zone: 5 usRotation angle: 180 degrees (+/-90)Voltage: 4.8-6.0V..
₱120.00 ₱127.00
Thrust Motor for underwater ROV3-blades propeller CW ThrustOperating Voltage Range: 3-12V (Recommended 6V-9V)Hull Lenght: 50mmDiameter: 31mmTotal Lenght: 76mmPropeller: 39mmRPM: 16800 RPM @ 7.4VDC no loadNote: CW and CCW motor should be used in a pair if your application requires the use of two moto..
₱665.00
Thrust Motor for underwater ROV3-blades propeller CCW ThrustOperating Voltage Range: 3-12V (Recommended 6V-9V)Hull Lenght: 50mmDiameter: 31mmTotal Lenght: 76mmPropeller: 39mmRPM: 16800 RPM @ 7.4VDC no load..
₱665.00
The **L293D Motor Driver Shield** is a device that can be used to control DC, stepper, and servo motors using an Arduino board. It is compatible with the Arduino UNO and MEGA boards. The shield features two L293D motor driver ICs and one eight-bit shift register chip. The L293D IC is a low-voltage o..
₱134.00 ₱140.00
3VDC Gear MicromotorGA12-N20Speed: 300RPMWorking Voltage: 1.5V-6VDCOutput Drive Shaft: d4.4 x 10mm..
₱220.00
3VDC Gear MicromotorGA12-N20Speed: 150RPMWorking Voltage: 1.5V-6VDCOutput Drive Shaft: d4.4 x 10mm..
₱220.00
Brand: e-Gizmo
8A DC Motor DriverOperating Voltage : 6V to 24VDCDevice : VNH5050A Peak Drive: 30 Amps (internally limited)Drive Ampacity: 8 Amps w/ heatsink 4 Amps no HeatsinkOverload Ampacity: 8 Amps for 25 secs (no heatsink) 10 Amps for 45 secs (with heatsink)Fault Indicators: Output Short Circuit Thermal Shu..
₱430.00
Brand: Ogura
Electromagnetic Clutch for Small Motors. Coil Voltage: 24VDCRegistration Clutchd6mm D shaped ShaftNylon Gear: 29mm diameter 27 teeth Gear Size: 1.00 MOD/ 25.4DPOverall Dimensions: d28.8 x 29 approx.Weight: 52g..
₱165.00
Generic MG996 RC Servo Motor w/AccessoriesMetal Gear drive shaft, Nylon internal gearingOperating Voltage: 4.8 to 7.2V DCSpeed: 160 degrees with 0.17 sec (4.8V,no load)Stall Torque: 15 kg-cm at 6VConnector Wire: 300 mmPackage:1x MG996R Servo Motor1x accessory pack..
₱246.00