*Robotic Stuffs

Cannon Iron Core MotorNominal Voltage: 24VDCOperating Voltage: 5V-24VDCNo Load RPM: 5100rpm @ 24VDCNo load Current: 85mA Typ. @24VDCPower Output: 27WTorque: 600 g-cmStarting Torque: 3800 g-cmTorque Constant: 470 g-cm/AVoltage Constant: 4.8V/1000rpmApproximate Dimensions:Body Diameter: 38mmBody Lengh..

Good Quality RS395 Type DC Motor usable down to 5VDC. With performance enhancing flux yoke to minimize magnetic leakage, keep the magnetic field inside of the motor where it is needed most.Manufacturer: Johnson ElectricNominal Voltage: 16.2VDCOperating Voltage: 5V-16.2VDCNo Load RPM: 12500rpm @ 12VD..

Good Quality RS395 Type DC Motor usable down to 5VDC. With performance enhancing flux yoke to minimize magnetic leakage, keep the magnetic field inside of the motor where it is needed most.Nominal Voltage: 16.2VDCOperating Voltage: 5V-16.2VDCNo Load RPM: 10000rpm @ 12VDC, 3900rpm @ 6VDCNo load Curre..

This stepper motor driver is for 5-phase type motor only.16 predetermined microsteps. Combining these steps makes it possible to microstep up to 125,000 pulses per revolution.Technodrive Made in Japan Input Power: 24-36VDCDrive Current: 0.5 to 1.4A per phase, switch selectablePulse Frequency: 500Kpp..

YN60 Low Speed High Torque Reversible Gear Motor.Operating Voltage: 110VAC 50/60HzOutput RPM: 8 RPM approx.Running Capacitor: 2.2uF 250VAC (not included)Motor Power: 4WWiring Guide:Black - CommonConnect 2.2uF Capacitor Across Red and Green WireConnect Hot side of power to Red (Reverse) or Green (For..

Type of Actuation: 3 positions ,5 ports, closed center, double solenoidCoil: 24VDCPort Size: Rc1/8Operating Pressure: 0.15-0.7MPaNote: This item is a quality used surplus in good working condition. Affordably priced for hobby and DIY enthusiasts. Expect minor cosmetic flaws like small dents, scratch..

Air Pressure RegulatorPressure Regulator Range: 7-100psiInput Pressure: 150psiActuator Lock: Knurled Screw with lock nutPort: M5Gauge Port size: 1/16 RcFlow Capacity: 4 SCFMNote: This item is a quality used surplus in good working condition. Affordably priced for hobby and DIY enthusiasts. Expect mi..

Working Voltage: 3-12VDCNo load Current: 55mA @ 12VDCGear Ratio: 67:1Encoder Supply Voltage: 5VDC @ 5mAEncoder Output: Logic 5V PulseMotor Diameter: 13mmDrive Shaft Diameter: 4mmDrive Shaft Length: 16mmBody Length: 67.5mmConnector: 5 pin FPCWeight: 35gPinout: See photosNote: This item is a quality u..

Working Voltage: 3-15VDCNo load Current: 80mA @ 15VDC TypicalNo load RPM: 80rpmGear Ratio: 65.5:1Motor Diameter: 26mmDrive Shaft Diameter: 4mmDrive Shaft Length: 12mmBody Length: 85mmWeight: 144gNote: This item is a quality used surplus in good working condition. Affordably priced for hobby and DIY ..

Bore Size: d50mmStroke: 10mmMode of Operation: Double ActingPiston-rod end: Female Thread M10Operating Pressure: 1MPa (45psi) max.Port Size: D12mmMaterial: Aluminium AlloyWeight: 378 approx.Body: 65x65x40mm approx.Note: This item is a quality used surplus in good working condition. Affordably priced..