Search

Quad Half-H Driver CA- Low cost Generic/Chinese Brand- IQC Sampled for logic function tests. Package/Image: DIP-16..

- Industrial grade 2 Phase Stepper, 0.5-2.0A/Phase, 3A, Unipolar, 40K pps, Microstep-Unipolar constant current drive methodA. Driver MD2U-MD20 (Made in Korea)Power Input: 24-35VDCCurrent Output: 3A max.Run Current: 0.5 to 2A per phaseStop Current: 20% to 70% user presetableMicro Steps: 1,2,4,5,8,10,..

- Industrial grade 2 Phase/4 Phase Stepper, 1.5A/Phase-Bipolar constant current drive methodIndustrial grade components are built tough and reliable. They are designed to work and survive harsh conditions normally found on the inside of the machines and some industrial environment settings.Model: M4..

- Industrial grade 2 Phase Stepper, 0.5-2.0A/Phase, 3A, Unipolar, 40K pps, Microstep-Unipolar constant current drive methodA. Driver MD2U-MD20 (Made in Korea)Power Input: 24-35VDCCurrent Output: 3A max.Run Current: 0.5 to 2A per phaseStop Current: 20% to 70% user presetableMicro Steps: 1,2,4,5,8,10,..

Stepper motor 3-12v..

This stepper motor driver is for 5-phase type motor only.16 predetermined microsteps. Combining these steps makes it possible to microstep up to 125,000 pulses per revolution.Technodrive Made in Japan Input Power: 24-36VDCDrive Current: 0.5 to 1.4A per phase, switch selectablePulse Frequency: 500Kpp..

This 3-phase Brushless DC Motors controller, although primarily designed for e-bikes, works just as well with many other DC brushless motors used for DIY projects.Operating Voltage: 36/48VDC Auto-selectOperating Current: 15A Max.Output Capacity: 350W maximumSpeed Control Input Voltage: 0-5VDCHall Se..

Motor Controller for 100W-500W 3-phase Brushless DC Motors. Operating Voltage: 12-36VDC (Note 1)Operating Current: 15A Max.Output Capacity: 500W (Note 2)Speed Control Input Voltage: 0-5VDCHall Sensor Input: 0-5V LogicNote 1: Although the manufacturer rates this for up to 36VDC, It is recommended to..

Pulse Width Modulation DC Motor Speed Controller.For DC Brush Motor OnlyOperating Voltage Range: 4.5VDC - 35VDCStandby Current: 7uA TypicalOutput Current: 5A MaximumRated Output: 90W maximumPWM Frequency: 20KHzDuty Cycle: 1-100%Package: 1x PWM Module1x Knob1set Potentiometer NutWeight: 15gDimensions..

2-Channel L9110S Motor Driver- Independent control of two DC motors - Alternatively, it can also be used to drive single bipolar (4-wire) stepper motorPower Supply Voltage: 2.5-12VDCMaximum Drive current: 800mA per outputTTL/CMOS compatible drive inputs..

This general purpose motor driver has two independent drivers that can be used to PWM speed control up to two DC brush motor, or as a driver for single bipolar stepper motor.Driver Chip: TC1508SOperation Voltage: 2V-10VDCCurrent: 1.5A Cont, 2.5A peakInput Logic Level: 5V Logic..