Menu
Your Cart

MOTION DETECTION: HC-SR501 Human Infrared Sensor Module

MOTION DETECTION: HC-SR501 Human Infrared Sensor Module
MOTION DETECTION: HC-SR501 Human Infrared Sensor Module
-24 %
MOTION DETECTION: HC-SR501 Human Infrared Sensor Module
MOTION DETECTION: HC-SR501 Human Infrared Sensor Module
MOTION DETECTION: HC-SR501 Human Infrared Sensor Module
₱78.00
₱102.00
  • Stock: In Stock
  • Product Code: 580012514
  • Weight: 0.00g
  • Product ID: 1191

HC-SR501 is based on infrared technology, automatic control module, using Germany imported LHI778 probe design, high sensitivity, high reliability, ultra low voltage operating mode, widely used in carious auto-sensing electrical equipment. especially for battery-operated automatic controlled products.




Features :
Automatic induction: to enter the sensing range of the output is high, the person leaves the sensing range of the automatic delay off high, output low
Photosensitive control (optional, not factory-set) can be set photosensitive control, day or light intensity without induction
Temperature compensation (optional, factory reset): In the summer when the ambient temperature rises to 30 ° C to 32 ° C, the detection distance is slightly shorter, temperature compensation can be used for performance compensation

Triggered in two ways: (jumper selectable)

- non-repeatable trigger: the sensor output high, the delay time is over, the output is automatically changed from high level to low level

- repeatable trigger: the sensor output high, the delay period, if there is human activity in its sensing range, the output will always remain high until the people left after the delay will be high level goes low (sensor module detects a time delay period will be automatically extended every human activity, and the starting point for the delay time to the last event of the time).

With induction blocking time (the default setting: 2.5s blocked time): sensor module after each sensor output (high into low), followed by a blockade set period of time, during this time period sensor does not accept any sensor signal. This feature can be achieved sensor output time “and” blocking time “interval between the work can be applied to interval detection products; This function can inhibit a variety of interference in the process of load switching. (This time can be set at zero seconds – a few tens of seconds)
Micropower consumption: static current <50 microamps, particularly suitable for battery-powered automatic control products
Wide operating voltage range: default voltage DC4.5V-20V
Output high signal: easy to achieve docking with the various types of circuit.




Specifications :
Power Input 5 - 20VDC
Power Consumption: 65mA
TTL output:
3.3V, 0V
Delay time: Adjustable (.3->5min)
Lock time:
0.2 sec
Trigger methods: L – disable repeat trigger, H enable repeat trigger
Sensing range:
less than 120 degree, within 7 meters
Temperature:
– 15 ~ +70
Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm




Downloads :
Technical Manual
Download
Datasheet
Download
Connection Diagram for Arduino/gizDuino
Download


Write a review

Note: HTML is not translated!
Bad Good
Captcha

Prices and stock availability subject to change without prior notice. If you want this product but it indicates it is not in stock, chat us or simply add it to your cart anyway. Our staff will contact you to inform if we can/cannot provide the item in your order.